Welcomt to Zhejiang Wei Chi Light Industry Machinery Co., Ltd Official website!!
 
 
Vacuum packaging machine how to ensure that the vacuum pump to work properly

    Vacuum packaging machine should be placed in dry and clean indoor use, not in the atmosphere containing acids and other corrosive gases in the body circulation place. Adjust the M10 screw on the front bearing to the appropriate position when the roller is running back and forth during operation. If the gear shaft is moving, adjust the M10 screw at the rear of the bearing frame to the proper position to adjust the clearance so that the bearing does not produce sound and turn the hand pulley. Such as a longer time to disable, the machine must be wiped clean body, machine parts coated with anti-rust oil smooth, covered with cloth Peng. Empty packaging machine should be in the temperature -10 ℃ -50 ℃, relative humidity less than 85%, the surrounding air, no corrosive gas, no dust, no explosive danger in the environment. The same as the baler and shrink machine, the vacuum packing machine for the three-phase 380V power supply. Vacuum packaging machine to ensure the normal work of the vacuum pump, vacuum pump motor is not allowed to reverse. Should always check the oil level, the normal oil level for the oil window 1 / 2-3 / 4 Department (can not exceed), when the vacuum pump water or oil color black, then replace the new oil (generally continuous work one or two Month replacement time, with 1 # vacuum gasoline or 30 # gasoline, oil can be). User-supplied working gas source and inflatable gas source, vacuum packing machine working pressure has been set to 0.3MPa, more appropriate, no special circumstances do not adjust too much. Packaging machinery industry in the face of market demand and how to catch up or even beyond the developed countries, food packaging machinery, and how to increase the pace of independent innovation, and strive to develop in a short time with a number of independent intellectual property rights and international advanced level of products, Is placed in China's food packaging machinery enterprises in front of the urgent task. Replacing the vacuum pump oil and oil filter If the oil is contaminated and dark, emulsify or thicken the oil in a timely manner. Oil change at the same time, replace the oil filter. And clean the pump before adding new oil. Cleaning oil, oil change steps: stop the pump will be hot oil let go; spin on the oil plug, running 5-10 seconds, the oil exhausted; into the cleaning oil (32 ordinary mechanical oil) to the oil window height of 3/4 ; Run the vacuum pump 5-10 minutes; stop the pump, the oil let go. Such as the release of the oil is still relatively turbid, fail to meet the requirements, repeat 3,4 steps until the release of the oil was transparent like; spin on the oil plugs running 5-10 seconds; the oil is exhausted; injected into the provisions of the new oil can. Vacuum packaging machine is the food into the bag, out of the bag of air, to achieve the desired degree of vacuum, the completion of sealing process. Can be vacuum forming - filling - sealing machine to have a shrink packaging machine packing machine installed machine work under the power of shrinking packet sealing machine installed: 1 on the bag sealing machine vacuum packaging machine pumping shrink packaging machine filling machine + Sealing; 2, vacuum packaging machine shrink packaging machine directly on the mouth of the bag sealed. Liquid filling machine is generally the process: the box with empty bottles stacked on the tray, the conveyor belt to the unloading tray machine, remove the tray one by one, with the conveyor belt to the box unloading machine, the empty bottle from The empty containers are conveyed to the washing machine through the conveyer belt, cleaned and transported to the packing machine so as to be filled with the beverage bottles.

 

 


 

 
Copyright © 2002-2014 Zhejiang Wei Chi Light Industry Machinery Co., Ltd All Rights Reserved. 浙ICP备06015405号 浙公网安备 33090302000208号 Technical support:93Baidu.com